Windows offers factory applied coatings utilising high performance water based
micro-porous paints to provide a semi or fully finished product. Due
to the special formulations used for our factory, we can achieve a higher film
build than by brush application which gives greater durability. For this
reason, we would recommend a fully finished product where budget permits.
|Windows are supplied as standard with one base coat and one additional coat to give a semi- finish. All semi-finished products incorporate:
- Flow coated water based Boron timber preservative
- One base coat opaque primer or translucent stain
- Either one additional coat translucent stain in the specified colour or one mid coat opaque paint coat.
A minimum of 1 coat of preservative plus a further 3 coats of paint or stain are applied for fully finished items.
A Colour Guide is available on request showing our standard colours on both hardwood and softwood chips. Please contact us for more information.
Please note that the Colour Guide is available for download but colours shown are indicative only and colour accuracy is not guaranteed. We can also match any RAL, NCS or BS paint colour of your choosing at extra cost.
We recommend that after storage or after following trades have completed, it may
be necessary to add a final ‘lustre' coat to bring our windows up to pristine
condition, even if the fully finished option has been ordered.
excellent performance of our coating systems, depending on aspect and location, our
fully finished products should only need one extra coat of paint every 4-7
years. Please contact us if you have any further queries regarding our
preservation and paint and stain finishing process.
fitting, maintenance and after-care information is available here .
details of our guarantee.